1 CAMSHAFTS
Brakes & Wheel End
ENGINEERED TO LAST LONGER • Heads are forged then machine-cut for a precise fit, providing a smooth contact surface for longer roller service life • Heads, journals and shaft splines are induction- hardened for durability and long service life • Splines are machine-rolled for durability • Shafts are precision-machined to ensure correct diameter and accurate journal bearings size • Manufactured in a ISO9001 and TS16949 certified factory specializing in S-Cams • 1-YEAR UNLIMITED MILEAGE PARTS WARRANTY
CS1728DGR
CS2428DGL
CROSSES
HEAD END
LENGTH (INCHES)
REPAIR KIT
PN EUCLID HENDRICKSON DAYTON BWP
PN
FOR HENDRICKSON INTRAAX®
1-1/2" dia.
1-1/2" dia.
1-1/4"
CS1128L 04-871122 M3799L OTR11450HD OTR11897 E-11450HD E-11897 E-11897H E-11897HD CS1128R RH 11-1/32" E-11867 S-24636-1R 04-870021 M3799R LH 11-1/32" E-11866 S-24636-1L
B
C
Left Hand
A
• 1-1/2" diameter, nominal head dim. 1-1/8", 28 spline
• HXS. Can be used with enclosed cam tube or exposed cam 2" O.D. bushing and seal.
FOR MERITOR® 4000–6000 SERIES WITH 16-1/2" Q+ , Q AND P BRAKES
1-5/8" dia.
1-1/2" dia.
1-1/4"
B
CS1728DGL LH 17-5/16" E2441B 2210 R 8156 04-891732 M990L OTR3520A OTR3520AHD E-3520A E-3520AHD E-3989AHD CS1728DGR RH 17-5/16" E2442B 2210 Q 8155 04-891731 M990R FOR MERITOR WITH 16-1/2" BRAKES CS1728DGL LH 17-5/16" E14822 2210 B 6866 04-911731 M3170L OTR3520A OTR3520AHD CS1728DGR RH 17-5/16" E14823 2210 C 6867 04-911732 M3170R CS2028DGL LH 20-13/32" E14824 2210 G 6871 04-912042 M3171L
A
Q+
• 1-1/2" diameter, nominal head dim. 1-3/16", 28 spline • Can be used with cast spiders with press-in bushings or fabricated spiders with weld-on bushings
1-5/8" dia.
1-1/2" dia.
Q+
OTR9078HD OTR9079HD E-3520A E-3520AHD E-3989AHD E-9078HD E-9078HD
1-1/4"
B
C
CS2028DGR RH 20-13/32" E14825 2210 F 6870 04-912041 M3171R CS2428DGL LH 24-1/16" E14820 2210 E 6869 04-932422 M3172L CS2428DGR RH 24-1/16" E14821 2210 D 6868 04-932121 M3172R
Left Hand
A
• 1-1/2" diameter, nominal head dim. 1-3/16", 28 spline • Double snap-ring groove under head
Note: All cam lengths are measured from beneath the cam head to the beginning of the lock ring groove.
FleetPride.com
34
Powered by FlippingBook