OTR Catalog

HEAVY DUTY

Available at

The OTR brand is dedicated to providing the highest quality heavy-duty parts on or off the road. Extensive customer research, independent testing, and product development go into each of our parts to ensure they keep your drivers safe and your trucks on the road. TRUCKING IS OUR BUSINESS ™ OTR offers a wide variety of heavy-duty parts including Brakes & Wheel End, Steering & Suspension, Lubricants & Filtration, Lighting, PTOs, and more. We understand what it takes to repair and maintain Class 8 trucks and we’re focused on delivering solutions that make the job faster and easier. OTR warranties are as good or better than OE and leading brands, and all OTR parts offer the same fit, form, and function as the OE parts they replace.

QUALITY • INNOVATION • DURABILITY

AIR BRAKE SYSTEMS • A/C • AIR INTAKE & EXHAUST • BRAKES • CAB • CHROME COOLING SYSTEM • ELECTRICAL • FILTRATION • HYDRAULICS • LIGHTING • LUBRICATION POWERTRAIN • STARTERS & ALTERNATORS • STEERING • SUSPENSION • TOOLS • WHEEL END

NEW PRODUCTS

DEF TESTER

FIFTH WHEEL KITS

EXPANDED TURBO COVERAGE

A/C LUBES

HEIGHT CONTROL VALVES

HYDRAULIC CAB CONTROLS

GLADHANDS

FUEL FILTER

OIL PUMPS

NEW & REMAN CYLINDER HEADS

HYDRAULIC RESERVOIRS

PTOs

TRAILER REPAIR

QUALITY • INNOVATION • DURABILITY

COMING SOON TO OTR

EGR COOLERS & VALVES OIL PANS STEERING GEARS DPF/ DOC CLAMPS & GASKETS

LANDING GEAR TARP MOTOR HEATER, RADIATOR, SILICON AND CHARGE AIR COOLER HOSES EXPANDED STARTER ASSORTMENT EXPANDED ALTERNATOR ASSORTMENT CREEPERS

AXLE NUT SOCKETS FILTER WRENCHES IMPACT SOCKETS

DISCLAIMER

While intended to be accurate, the information contained in the OTR Catalog is included for informational purposes only. Cross-references are to possible replacement and/or comparable parts, have been obtained from our parts suppliers and are subject to change without notice. Tech Tips, troubleshooting / diagnostic information and other guidance are general in nature and may not completely address all possible issues and causes. Use of this information is not intended to be a substitute for professional judgment. We recommend you contact

the OEM / applicable part manufacturer in order to verify the suitability of a part for the intended application or a certified or experienced technician regarding any specific questions that you have. We make no warranty or guarantee, express or implied, as to the correctness, completeness, timeliness, merchantability or fitness for a particular purpose of the catalog or its content. We accept no responsibility or liability for any losses or damages of any kind arising out of the use of the catalog or any of its related functions, including but not limited

to any misapplications or misdiagnoses based in whole or in part upon the use of this information. Some products are not available in all geographic regions. All marks used herein are the property of their respective owners and are used with permission. FleetPride and OTR are registered trademarks of FleetPride, Inc. and may not be used without permission.

©FleetPride, Inc. 2020

FleetPride.com

TABLE OF CONTENTS

1 | BRAKES & WHEEL END 8-43 New Brake Shoe Kits. . . . . . . . . . . . . 8-19 Formula Cross Reference. . . . . . . . . . . . 20 Relined to New Shoe Kit Cross. . . . . . . . . . 21 Relined Brake Shoes. . . . . . . . . . . . .22-28 Brake Drums. . . . . . . . . . . . . . . . . .29 Air Disc Brakes – Pads. . . . . . . . . . . . . 30 Air Disc Brakes – Rotors. . . . . . . . . . . . . 31 Air Disc Calipers. . . . . . . . . . . . . . . 32-33 Camshafts. . . . . . . . . . . . . . . . . 34-35 Camshaft Repair Kits. . . . . . . . . . . . . . 36 Auto Slack Adjusters. . . . . . . . . . . . . . 37 Manual Slack Adjusters. . . . . . . . . . . . . 38 Wheels – Steel. . . . . . . . . . . . . . . . .38 Wheels – Aluminum. . . . . . . . . . . . . . .39 Wheel Bearings . . . . . . . . . . . . . . . . 40 Wheel Seals . . . . . . . . . . . . . . . . . . 41 Hubcaps . . . . . . . . . . . . . . . . . . . 41 Hubcap Gaskets. . . . . . . . . . . . . . . . 42 Drive Axle Gaskets . . . . . . . . . . . . . . .42 Chrome Wheel Products. . . . . . . . . . . . . 43 Axle Nut Sockets. . . . . . . . . COMING SOON 44-56 Brake Chambers . . . . . . . . . . . . . . . . 44 Brake Chambers – Testing. . . . . . . . . . . .45 Brake Chambers – Drum Brakes. . . . . . . .46-49 Air Disc Brake Chambers. . . . . . . . . . . . 50 Gladhands. . . . . . . . . . . . . . . . . . . 51 Gladhands – Handles & Seals. . . . . . . . . . 52 Air Dryers, Cartridges & Accessories. . . . . . . 53 Air Governors. . . . . . . . . . . . . . . . . 54 Air Compressor Unloader Kits. . . . . . . . . . 54 Air Disc Brake Sensor Cables & Extensions. . . . 54 Valves. . . . . . . . . . . . . . . . . . . . .55 Manifold Dash Valves. . . . . . . . . . . . . .56 Air Hose Repair Kits. . . . . . . . . . . . . . .56 Air Tank Accessories. . . . . . . . . . . . . . 56 2 | AIR SYSTEM

QUALITY • INNOVATION • DURABILITY

TABLE OF CONTENTS

3 | SUSPENSION & STEERING 57-75 Height Control Valves . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Power Steering Components. . . . . . . . . . . . . . . . .58-59 Trailer Leaf Springs . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 Suspensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-67 U-Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68-72 U-Bolt Hi-Nuts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 U-Bolt Washers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 U-Bolt Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73-74 Steer i ng Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Steering Gears . . . . . . . . . . . . . . . . . . . COMING SOON 76-80 Clutches. . . . . . . . . . . . . . . . . . 76-77 Clutches – Self-Adjusting. . . . . . . . . . . . 78 Clutch Components. . . . . . . . . . . . . . . 79 Flywheels . . . . . . . . . . . . . . . . . . .80 4 | DRIVETRAIN 5 | ENGINE 81-82 Cylinder Heads. . . . . . . . . . . . . . . . . 81 Oil Pumps . . . . . . . . . . . . . . . . . . .82 Oil Pans. . . . . . . . . . . . . COMING SOON 6 | STARTERS, ALTERNATORS & ELECTRICAL 83-90 Alternators. . . . . . . . . . . . . . . . . . .83 Starters. . . . . . . . . . . . . . . . . . . . 84 Batteries – Heavy-Duty. . . . . . . . . . . .85-88 Electrical Cables. . . . . . . . . . . . . . .89-90 High Amp Circuit Breakers. . . . . . . . . . . .90 Expanded Starter Assortment. . . . COMING SOON Expanded Alternator Assortment. . COMING SOON

FleetPride.com

7 | LUBRICATION & FILTRATION 91-97 Motor Oil. . . . . . . . . . . . . . . . . . . 91 Transmission Fluid. . . . . . . . . . . . . . . 92 Gear Oil. . . . . . . . . . . . . . . . . . . .93 Hydraulic Fluid. . . . . . . . . . . . . . . . .94 Grease. . . . . . . . . . . . . . . . . . . . 95 Cabin Air Filters. . . . . . . . . . . . . . . . 96 Spin on Fuel Filter . . . . . . . . . . . . . . . 97

8 | FUEL SYSTEMS 98-99 Fuel Injectors – Reman. . . . . . . . . . . .98-99

9 | ENGINE MANAGEMENT 100-103 DPFs & DOCs. . . . . . . . . . . . . . . . . 100 DPFs. . . . . . . . . . . . . . . . . . . . . 101 DOCs. . . . . . . . . . . . . . . . . . . . 102 Diesel Exhaust Fluid . . . . . . . . . . . . . . 103 EGR Coolers & Valves. . . . . . . COMING SOON DPF/ DOC Clamps & Gaskets . . . . COMING SOON 104-107 A/C Compressors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Receiver Drivers/ Accumulators . . . . . . . . . . . . . . . . 105 Expansion Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Condensers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Blower Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Evap o rators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Compressor A/C Clutches . . . . . . . . . . . . . . . . . . . . . 106 Switches & Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 A/C Lubricants & Flush . . . . . . . . . . . . . . . . . . . . . . . . 107 10 | AIR CONDITIONING & HEATING

QUALITY • INNOVATION • DURABILITY

11 | COOLING SYSTEM 108-122 Antifreeze / Coolant. . . . . . . . . . . . . . 108 Radiators. . . . . . . . . . . . . . . . . 109-115 Water Pumps. . . . . . . . . . . . . . . . 116-122 Heater, Radiator, Silicon and Charge Air Cooler Hoses. . . . . COMING SOON 123-137 Charge Air Coolers . . . . . . . . . . . . 123-127 Intake Charge Air Hose. . . . . . . . . . . . . 128 Turbos . . . . . . . . . . . . . . . . . . . . 129 Turbos – Troubleshooting. . . . . . . . . . . . . . . . . . . . . . 130 Turbos – Proper Installation. . . . . . . . . . . 131 Turbos . . . . . . . . . . . . . . . . . . 132-136 Turbos – Medium-Duty. . . . . . . . . . . 136-137 12 | AIR INTAKE 13 | EXHAUST 138-143 Connectors. . . . . . . . . . . . . . . . . . 138 Reducers. . . . . . . . . . . . . . . . . . . 139 Elbows. . . . . . . . . . . . . . . . . . 139-141 Bellows . . . . . . . . . . . . . . . . . . . 141 Pipes . . . . . . . . . . . . . . . . . . . . 142 Muffler Hangers . . . . . . . . . . . . . . . . 143 Stack Pipes. . . . . . . . . . . . . . . . . . 143 144-162 Universal Lighting . . . . . . . . . . . . . 144-146 Signal Lighting. . . . . . . . . . . . . . . . 147 Marker & Clearance Lighting. . . . . . . . 148-154 License & Back-up Lighting. . . . . . . . . 155-157 Work Lamps . . . . . . . . . . . . . . . . . 157 Forward Lighting . . . . . . . . . . . . . . . 158 Strobes, Safety & Warning Lights . . . . . . 158-159 Warning & Emergency Lighting. . . . . . . . . 159 Harnesses & Pigtails. . . . . . . . . . . . 160-161 Accessories. . . . . . . . . . . . . . . . 161-162 14 | LIGHTING

FleetPride.com

15 | TOOLS & SAFETY 163 Tire Bead Seater . . . . . . . . . . . . . . . 163 Alarms . . . . . . . . . . . . . . . . . . . . 163 Mud Flap Hanger. . . . . . . . . . . . . . . 163 Filter Wrenches . . . . . . . . . . COMING SOON Impact Sockets. . . . . . . . . . COMING SOON Tarp Motor. . . . . . . . . . . . COMING SOON Creepers. . . . . . . . . . . . . COMING SOON 164-165 Adhesives & Sealants. . . . . . . . . . . . . 164 Aluminum Trailer Patches. . . . . . . . . . . . 165 Fifth Wheel Rebuild & Repair Kits. . . . . . . . 165 Landing Gear . . . . . . . . . . . COMING SOON 16 | TRAILER REPAIR 17 | HYDRAULICS & PTO 166-170 PTO. . . . . . . . . . . . . . . . . . . 166-168 Dump Pumps & Reservoirs. . . . . . . . . . . 169 Cab Air Controls. . . . . . . . . . . . . . . . 170

Index. . . . . . . . . . . . . . . . . . . 171-176

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End 1 NEW BRAKE SHOE KITS

VOCATION SPECIFIC FRICTION MATERIAL • Meets or exceeds all FMVSS121 requirements • Exceptional flex strength and elements of elasticity to prevent cracking • Superior drum compatibility, reducing maintenance and downtime • Copper-free brake lining

SEVERE-DUTY HARDWARE KITS • Severe-duty springs are tested to 1,000,000 cycles

• 20% more spring force at installed length vs standard springs • Heat treated to prevent shock loads from causing premature failure • 3 times the life of standard springs

NEW BRAKE SHOE TABLES • New steel ensures precise table geometry • Continuous weld pattern for strength and durability • Paint coating tested over 1,000 salt spray hours • Heat treated to reduce cam and anchor wear

FleetPride.com

Brakes & Wheel End

NEW BRAKE SHOE KITS

APPLICATION GUIDE

20K

23K

SPECIALTY

HEAVY HAUL

HEAVY HAUL PRO

SEVERE SERVICE 23

SEVERE SERVICE 26

LINEHAUL

FLEET

FLEET PRO LINEHAUL

APPLICATION

P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P

Beverage / Single Axle Tractor/Trailers

Tandem Axle Tractor/Trailers

Flat Bed Trailers

Double Trailers

Moving Vans, Low Profile

Logging Trailers

School Buses

Refuse

Mixer/Tandem Mixers

Dumps/Tandem Dumps/ Tri-Axle Dumps

Container Chassis

Car Haulers

P P

Transit/Coaches

Fire Trucks

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End

NEW BRAKE SHOE KITS

RSD: 20,000 GAWR

• Premium friction material formulated and tested to exceed FMVSS 121 (RSD) Reduced Stopping Distance Requirements • Our premium friction material has been third-party certified to exceed all dynamometer and on-vehicle performance mandates (AL Factor 165) • New steel brake shoes are heat-treated, hardened to precise standards and then powder coated to withstand the harshest conditions

APPLICATION

DRUM DIAMETER WIDTH

K4725E-RSD20 Eaton ES K4709E2-RSD20 Eaton ES I & II K4720Q-RSD20 Meritor® Q+™ K4707Q-RSD20 Meritor Q+ K4718Q-RSD20 Meritor Q+

16.50" 16.50" 16.50" 16.50" 16.50"

6.00" 7.00" 5.00" 7.00" 8.00"

TESTING Typical inertia dynamometer plot test parameters

FMVSS 121 BRAKE STANDARD: RSD 20K

RED

RECOVERY

BRAKE FADE

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

Brake: 16.5" x 7" Drive axle 16.5" x 5" Steer axle Axle Load: 20,000 lb AL Factor: 165 Normal Friction: 0.493 G Hot Friction: 0.488 G

120

1200

120

1200

MAXIMUM LIMIT

800

400

UNL

0 1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

REDUCED STOPPING DISTANCE TESTING: RSD 20K

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

RSD Standard & OTR Stopping Distance

1200

FMVSS 121

250 FEET

800

LADEN

OTR RSD

400

FMVSS 121

235 FEET

UNLADEN

OTR RSD 186 FEET

0 5 17 19

AIR PRESSURE (PSI )

0 50 100 150 200 250

ATURE (ºF)

FEET

FleetPride.com

Brakes & Wheel End 1 NEW BRAKE SHOE KITS

RSD: 23,000 GAWR

APPLICATION WIDTH

K4719ES2-RSD23 Eaton ES II K4725ES2-RSD20 Eaton ES II K4726ES2-RSD23 Eaton ES II K4709ES2-RSD20 Eaton ES I & II K4709ES2-RSD23 Eaton ES I & II K4702Q-RSD23 Meritor® Q+™ K4707Q-RSD20 Meritor Q+ K4707Q-RSD23 Meritor Q+

5.00 6.00 8.63 7.00 7.00 4.00 7.00 7.00

K4710Q-RSD23 Meritor Q+ K4711Q-RSD23 Meritor Q+ K4715Q-RSD23 Meritor Q+ K4718Q-RSD20 Meritor Q+ K4718Q-RSD23 Meritor Q+ K4720Q-RSD20 Meritor Q+ K4720Q-RSD23 Meritor Q+

8.63 8.63 6.00 8.00 8.00 5.00 5.00

TESTING Typical inertia dynamometer plot test parameters

FMVSS 121 BRAKE STANDARD: RSD 23K BRAKE FADE MAXIMUM LIMIT 120 1200

RECOVERY

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

Brake: 16.5" x 7" Drive axle 16.5" x 5" Steer axle Axle Load: 23,000 lb AL Factor: 165 Normal Friction: 0.493 G Hot Friction: 0.488 G

120

1200

MAXIMUM LIMIT

800

400

0 1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

REDUCED STOPPING DISTANCE TESTING: RSD 23K

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

RSD Standard & OTR Stopping Distance

1200

LIMIT

FMVSS 121

250 FEET

800

LADEN

OTR RSD

400

FMVSS 121

235 FEET

UNLADEN

LIMIT

OTR RSD 185 FEET

0 13 15 17 19

AIR PRESSURE (PSI )

0 50 100 150 200 250

MPERATURE (ºF)

FEET

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End 1 NEW BRAKE SHOE KITS

LINEHAUL: 20,000 GAWR (20LH)

• Specially designed to be a cost-effective solution for your Linehaul needs • Stable stopping power over a wide range of temperatures, pressure and speed variations • Provides good fade and recovery characteristics • Good brake power and friction stability • Medium-friction asbestos- and copper-free brake lining • Glass-acrylic based fiber • FMVSS 121 rated for 20,000 lbs (165 AL Factor)

TESTING Typical inertia dynamometer plot test parameters

FMVSS 121 BRAKE STANDARD: LINEHAUL 20K BRAKE FADE MAXIMUM LIMIT 120 120 1200

RECOVERY

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

Brake: 16 1/2" x 7" Axle Load: 20,000 lb AL Factor: 165 Normal Friction: 0.462 G Hot Friction: 0.450 F

1200

MAXIMUM LIMIT

800

400

0 1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

APPLICATIONS

Container Chassis

Flat Bed Trailers

Double Trailers

FleetPride.com

Brakes & Wheel End 1 NEW BRAKE SHOE KITS

FLEET: 20,000 GAWR (20FL)

• Impressive stopping power over a wide range of temperatures, pressure and speed variations • Outperforms other brake linings in its price category for drum compatibility and wear life • Provides good fade and recovery characteristics • Recognized for reliability, durability, and versatile performance • Medium/high-friction asbestos- and copper-free brake lining • Glass-acrylic based fiber • FMVSS 121 rated for 20,000 lbs (165 AL Factor)

TESTING Typical inertia dynamometer plot test parameters

FMVSS 121 BRAKE STANDARD: FLEET 20FL BRAKE FADE MAXIMUM LIMIT 120 1200

RECOVERY

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

Brake: 16.5" x 7" Axle Load: 20,000 lb AL Factor: 165 Normal Friction: 0.369 F Hot Friction: 0.387 F

120

MAXIMUM LIMIT

800

400

1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

APPLICATIONS

Beverage / Single Axle Tractor/Trailers

Car Haulers

Container Chassis

Double Trailers

Tandem Axle Tractor/ Trailers

Flat Bed Trailers

Moving Vans, Low Profile

School Buses

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End 1 NEW BRAKE SHOE KITS

FLEET PRO: 20,000 GAWR (20FLP)

• Exceptional stopping power over a wide range of temperatures, pressure and speed variations • One of the highest performing premium grade blocks available today • Provides good fade and recovery characteristics • Exceptional reliability, durability, and versatile performer • Medium/high-friction asbestos- and copper-free brake lining • Surpasses the FMVSS 121 brake standard at 21,000 lbs (165 AL Factor)

TESTING Typical inertia dynamometer plot test parameters FMVSS 121 BRAKE STANDARD: FLEET PRO 20FLP BRAKE FADE MAXIMUM LIMIT 120 120 1200

RECOVERY

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

Brake: 16.5" x 7" Axle Load: 21,000 lb AL Factor: 165 Normal Friction: 0.407 G Hot Friction: 0.439 F

1200

MAXIMUM LIMIT

800

400

0 1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

APPLICATIONS

Beverage / Single Axle Tractor/Trailers

Car Haulers

Container Chassis

Double Trailers

Logging Trailers

Flat Bed Trailers

Moving Vans, Low Profile

School Buses

Tandem Axle Tractor/Trailers

FleetPride.com

Brakes & Wheel End 1 NEW BRAKE SHOE KITS

LINEHAUL: 23,000 GAWR (23LH)

• Specially designed to be a cost-effective solution for your Linehaul needs • Delivers a level of durability and friction stability not usually found in this price category • Stable stopping power over a wide range of temperatures, pressure and speed variations • Provides good fade and recovery characteristics • Medium-friction asbestos- and copper-free brake lining • Glass-acrylic based fiber • FMVSS 121 rated for 23,000 lbs (165 AL Factor)

TESTING Typical inertia dynamometer plot test parameters

FMVSS 121 BRAKE STANDARD: LINEHAUL (23LH) BRAKE FADE MAXIMUM LIMIT 120 120 1200

RECOVERY

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

Brake: 16.5" x 7" Axle Load: 23,000 lb AL Factor: 165 Normal Friction: 0.453 G Hot Friction: 0.485 G

MAXIMUM LIMIT

800

400

1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

APPLICATIONS

Container Chassis

Flat Bed Trailers

Double Trailers

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End 1 NEW BRAKE SHOE KITS

HEAVY HAUL: 23,000 GAWR (23HH)

• Exceptional brake power for a broad range of applications • Delivers extended wear life and minimum degradation of the drum • High-temperature resins provide exceptional friction stability • Medium/high-friction asbestos- and copper-free brake lining • Glass-aramid based fiber • Surpasses the FMVSS 121 brake standard at 23,000 lbs (165 AL Factor)

TESTING Typical inertia dynamometer plot test parameters FMVSS 121 BRAKE STANDARD: HEAVY HAUL (23HH) BRAKE FADE MAXIMUM LIMIT 120 120 1200

RECOVERY

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

Brake: 16.5" x 7" Axle Load: 23,000 lb AL Factor: 165 Normal Friction: 0.429 F Hot Friction: 0.445 F

MAXIMUM LIMIT

800

400

1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

APPLICATIONS

Beverage / Single Axle Tractor/Trailers

Car Haulers

Container Chassis

Double Trailers

Tandem Axle Tractor/Trailers

Flat Bed Trailers

Moving Vans, Low Profile

School Buses

FleetPride.com

Brakes & Wheel End 1 NEW BRAKE SHOE KITS

• Proven durability for both stop-and-go urban driving • Delivers stronger brake power over a broad range of heavy-duty applications • Provides superior fade and recovery characteristics • Superior all-around performance • Excellent drum compatibility, decreasing maintenance and downtime • Superior flexural strength and modules of elasticity to resist cracking • Low swell and growth eliminate potential for wheel lockup • Asbestos- and copper-free brake lining • Meets the FMVSS 121 brake standard at 23,000 lbs (165 AL Factor) HEAVY HAUL PRO: 23,000 GAWR (23HHP)

TESTING Typical inertia dynamometer plot test parameters

FMVSS 121 BRAKE STANDARD: HEAVY HAUL PRO 23HHP BRAKE FADE MAXIMUM LIMIT RECOVERY 120 120 1200

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

Brake: 16.5" x 7" Axle Load: 23,000 lb AL Factor: 165 Normal Friction: 0.432 F Hot Friction: 0.440 F

MAXIMUM LIMIT

800

400

1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

APPLICATIONS

Beverage / Single Axle Tractor/Trailers

Car Haulers

Container Chassis

Double Trailers

Dumps/Tandem Dumps/ Tri-Axle Dumps

Fire Trucks

Flat Bed Trailers

Logging Trailers

Mixer/Tandem Mixers

Moving Vans, Low Profile

Refuse

School Buses

Tandem Axle Tractor/Trailers

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End 1 NEW BRAKE SHOE KITS

SEVERE SERVICE: SPECIALTY (23SS, 26SS)

• Provides superior fade and recovery characteristics • Proven reliability, durability and versatile performance

• Exceptional drum compatibility, decreasing maintenance and downtime • Superior flexural strength and modules of elasticity to resist cracking • Low thermal expansion provides great compatibility with automatic slack adjusters • Medium/high-friction asbestos- and copper-free brake lining • Meets the FMVSS 121 brake standard at 26,000 lbs (210 AL Factor) 23SS • Combines low cost per mile and safety • Low swell and growth eliminate potential for wheel lockup TESTING Typical inertia dynamometer plot test parameters

FMVSS 121 BRAKE STANDARD: SEVERE SERVICE (23SS) BRAKE FADE MAXIMUM LIMIT RECOVERY 120 120 1200

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

Brake: 14.5" x 10" Axle Load: 26,000 lb AL Factor: 210 Normal Friction: 0.431 F Hot Friction: 0.423 F

MAXIMUM LIMIT

800

400

1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

26SS • Works in both high- and low-floor applications TESTING Typical inertia dynamometer plot test parameters FMVSS 121 BRAKE STANDARD: SEVERE SERVICE (26SS) BRAKE FADE MAXIMUM LIMIT RECOVERY 120 120 1200

Brake: 16.5" x 8.625" Axle Load: 28,666 lb AL Factor: 195 Normal Friction: 0.463 G Hot Friction: 0.423 F

8 7 6 5 4 3 2 1 0 20 30 40 50 60 70 80 50 MPH RETARDATION MINIMUM

MAXIMUM LIMIT

800

400

1 3 5 7 9 11 13 15 17 19 MINIMUM LIMIT

1 2 3 4 5 6 7 8 9 10

STOPS

AIR PRESSURE (PSI )

PRESSURE TEMPERATURE (ºF)

APPLICATIONS

Transit/Coaches

FleetPride.com

Brakes & Wheel End

NEW BRAKE SHOE KITS

COLOR & PART NUMBER GUIDES – UPGRADING FROM OTR RELINED TO OTR NEW

EDGE CODE COLOR GUIDE

OTR RELINED OTR NEW

Black

LINE HAUL 20LH

20,000 GAWR

Blue

FLEET 20FL

(N/A)

FLEET PRO 20FLP

Green

LINE HAUL 23LH

23,000 GAWR

Red

HEAVY HAUL 23HH

Orange

HEAVY HAUL PRO 23HHP

Silver

SEVERE SERVICE 23K

SEVERE SERVICE

Gold

SEVERE SERVICE 26K

KIT PART NUMBER DECODER Use the following example to decode the brake shoe kit part number and decipher its specifications.

K 4707Q LH 23

KIT

FMSI #

AXLE WEIGHT

VOCATION F

Fleet FLP Fleet Pro HH Heavy Haul HHP Heavy Haul Pro LH Linehaul RSD Reduced Stopping Distance SS Severe Service

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End

FORMULA CROSS REFERENCE

20K

23K

25K

26K

28.7K

SEVERE SERVICE

EXTRA DUTY

SEVERE SERVICE TRANSIT

TYPE ECONOMY STANDARD PREMIUM ECONOMY STANDARD PREMIUM

TRANSIT

OTR

REMAN

OTR BLACK

OTR BLUE OTR GREEN OTR RED OTR ORANGE OTR SILVER OTR GOLD

NEW COLORS LIGHT BLUE

BLUE

DARK BLUE LIGHT GREEN GREEN DARK GREEN RED

RED

SEVERE SERVICE 23SS

SEVERE SERVICE 26SS

NEW VOCATION

LINE HAUL 20LH

LINE HAUL 23LH

HEAVY HAUL 23HH

HEAVY HAUL PRO 23HHP

FLEET 20FL FLEET PRO 20FLP

CROSS

NP20 NS20 VL20 6085

6008-1 6011 SM 6028 AMF4008 Green

Metro Combo (685/697) MX (697)

6014 6166

NP23 NS23 VL23

6098 SM/6098 6028

ABEX

6149

685

AUTOMANN AMF6000 No Color

AMF5008 Blue

AMF4008 Green AMF3085 Red

AMF3100 White

BENDIX BB200 (Black)

BX380 ES420

Bronze

ES8000

BA200 BA201 (Blue)

BA202R Orange

DNA38 DNA68

DUROLINE

DNA10

DNA18

DNA11

DNA68 DNA25 DNA88

DNA68

DNA88

FRAS-LE

F520

F540

F550-1

F523

F555-1

F557

F560/F555-1 F560

F557T

F787T

GORILLA BRAKE

GB20STD SC20

GB20PR SBA20

GB23HD SBP23 GH2030 GG2020

SBP20 GB23STD GB23PR SBA23

GB23TFT

GN2017 HV77

GC20/35 GZ2035

HALDEX

GF2008

GR2015

HV88

GD2016

MARATHON

MV20

HS20

MV23

FLOE

MBC MBS KVT

HST MBST

KVT

MA210 MA212

MERITOR

MG1

EG2

MG2

MA310

NABK142 TO143

TEXTAR

D020K

D2000

T2000

D023K

D2300

T2300

NABK132 NABK Combo 171

Ultrapeak BRT

Ultrapeak FT

STEMCO

SP20

Crest XL

SP23

Vista HP Vista HP1 Ultrapeak

TRUCKPRO

AR1

AR2

AR3

AR4

AR5

FleetPride.com

Brakes & Wheel End

RELINED TO NEW SHOE KIT CROSS

RELINED

NEW

RELINED NEW XKOTR4707QGLD or KITOTR4707QGLD K4707Q-SS26 XKOTR4707QGRN or KITOTR4707QGRN K4707Q-LH23 XKOTR4707QORG or KITOTR4707QORG K4707Q-HHP23 XKOTR4707QORG or KITOTR4707QORG K4707Q-SS23 XKOTR4707QRED or KITOTR4707QRED K4707Q-HH23 XKOTR4709E2BLK or KITOTR4709E2BLK K4709E2-LH20 XKOTR4709E2BLU or KITOTR4709E2BLU K4709E2-FL20 XKOTR4709E2GLD or KITOTR4709E2GLD K4709E2-SS26 XKOTR4709E2GRN or KITOTR4709E2GRN K4709E2-LH23 XKOTR4709E2RED or KITOTR4709E2RED K4709E2-HH23 XKOTR4709EORG or KITOTR4709EORG K4709E2-HHP23 XKOTR4710QRED or KITOTR4710QRED K4710Q-HH23 XKOTR4711QBLU or KITOTR4711QBLU K4711Q-FL20 XKOTR4711QORG or KITOTR4711QORG K4711Q-HHP23 XKOTR4711QRED or KITOTR4711QRED K4711Q-HH23 XKOTR4715QBLU or KITOTR4715QBLU K4715Q-FL20 XKOTR4715QRED or KITOTR4715QRED K4715Q-HH23 XKOTR4718QBLU or KITOTR4718QBLU K4718Q-FL20 XKOTR4718QRED or KITOTR4718QRED K4718Q-HH23 XKOTR4719E2RED or KITOTR4719E2RED K4719E2-HH23 XKOTR4720QBLU or KITOTR4720QBLU K4720Q-FL20 — K4707Q-FLP20 XKOTR4720QRED or KITOTR4720QRED K4720Q-HH23 XKOTR4725E2RED or KITOTR4725E2RED K4725E2-HH23 XKOTR4726E2BLU or KITOTR4726E2BLU K4726E2-FL20 XKOTR4726E2ORG or KITOTR4726E2ORG K4726E2-HHP23 XKOTR4726E2RED or KITOTR4726E2RED K4726E2-HH23

XKOTR1308EBLU or KITOTR1308EBLU XKOTR1308ERED or KITOTR1308ERED XKOTR1443EBLU or KITOTR1443EBLU XKOTR1443ERED or KITOTR1443ERED XKOTR4311EGRN or KITOTR4311EGRN XKOTR4311ERED or KITOTR4311ERED

K1308E-FL20 K1308E-HH23 K1443E-FL20 K1443E-HH23 K4311E-LH23 K4311E-HH23

XKOTR4515QBLK or KITOTR4515QBLK K4515Q-LH20 XKOTR4515QBLU or KITOTR4515QBLU K4515Q-FL20 — K4515Q-FLP20 XKOTR4515QGRN or KITOTR4515QGRN K4515Q-LH23 XKOTR4515QORG or KITOTR4515QORG K4515Q-HHP23 XKOTR4515QRED or KITOTR4515QRED K4515Q-HH23 XKOTR4515X3BLK or KITOTR4515X3BLK K4515X3-LH20 XKOTR4515X3BLU or KITOTR4515X3BLU K4515X3-FL20 XKOTR4515X3GRN or KITOTR4515X3GRN K4515X3-LH23 XKOTR4515X3RED or KITOTR4515X3RED K4515X3-HH23 XKOTR4551QORG or KITOTR4551QORG K4551Q-HHP23 XKOTR4702QBLU or KITOTR4702QBLU K4702Q-FL20 — K4702Q-FLP20 XKOTR4702QRED or KITOTR4702QRED K4702Q-HH23 XKOTR4703QBLU or KITOTR4703QBLU K4703Q-FL20 XKOTR4707QBLK or KITOTR4707QBLK K4707Q-LH20 XKOTR4707QBLU or KITOTR4707QBLU K4707Q-FL20 — K4707Q-FLP20 XKOTR4707QGLD or KITOTR4707QGLD K4707Q-SS26 XKOTR4707QGRN or KITOTR4707QGRN K4707Q-LH23 XKOTR4707QORG or KITOTR4707QORG K4707Q-HHP23

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End 1 RELINED BRAKE SHOES

FRICTION SELECTION GUIDE

DUTY CYCLE GAWR PRICE

TERRAIN LOAD

PERFORMANCE

TERRAIN LOAD

PERFORMANCE

20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K

20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K 20K 23K

BLUE

RED

BLACK

BLUE

LONG

RED

SILVER

GREEN

RED

BLUE

RED

BLACK

BLUE

MIXED

RED

SILVER

GREEN

RED

BLUE

RED

BLUE

CITY

SILVER

RED

BLUE

RED

BLACK

BLUE

LONG

RED

ORANGE

GREEN

RED

BLUE

RED

BLACK

BLUE

MIXED

RED

ORANGE

GREEN

RED

BLUE

RED

CITY

ORANGE

RED

ORANGE

RED

BLUE

LONG

GOLD

RED

BLUE

MIXED

GOLD

RED

ORANGE

SILVER

RED

CITY

GOLD

ORANGE

BLACK

BLUE

LONG

GREEN

RED

GROSS AXLE WEIGHT RATING (GAWR) 20 23 26

BLACK

BLUE

MIXED

OPTIONS

GREEN

RED

STANDARD

BLUE

BLACK

GREEN

CITY

RED

ORANGE

PREMIUM

BLUE

RED

BLUE

LONG

SEMI-METAL COMBO

SILVER

RED

BLUE

HIGH-TEMPERATURE

ORANGE

MIXED

RED

SILVER

SEVERE SERVICE

GOLD

BLUE

CITY

SILVER

BLUE

LONG

ORANGE

BLUE

MIXED

ORANGE

RED

CITY

FleetPride.com

ORANGE

Brakes & Wheel End 1 RELINED BRAKE SHOES

STANDARD MIXES BLACK • 20K rated • Comparable to Abex® AN6166, Haldex® GN2017, Fras-le® AF540 GREEN • 23K rated • Comparable to Abex AX6149, Haldex GD2016, Fras-le AF555

PREMIUM MIXES BLUE • 20K rated, 12K front • Comparable to Abex 6008-1, Haldex GR3010, Meritor® MA212 RED • 23K rated, 13.2K front • Comparable to Abex 685, Haldex GG3020, Meritor MA312

Original Equipment Grade

All mixes meet/exceed FMVSS121 testing. OTR Silver, Orange and Gold are available for Hi-Temp and Severe Service applications.

STANDARD

PREMIUM

ABEX PREMIUM® CROSSES

SHOE TYPE

BRAKE SIZE

20K

23K

20K

23K

20K

20KRSD 23K

23KRSD

12-1/2" x 7-1/2" 4591SF —

— — — — — — — — — — — — —

—-

OTR4591SF-RED —

— EX4591SF —

15" x 4" 15" x 4" 15" x 4" 15" x 4" 15" x 4"

1308E — 1308P (T) — 1308Q — 1443E — 4702Q — 4719E2 — 4720Q — 4524Q — 4524QM — 4514Q — 4715Q — 4725E2 —

OTR1308E-BLU OTR1308E-RED EN1308E — EX1308E —

OTR1308P-BLU —

—

— EX1308P —

OTR1308Q-BLU OTR1308Q-RED EN1308Q — EX1308Q — OTR1443E-BLU OTR1443E-RED EN1443E — EX1443E — OTR4702Q-BLU OTR4702Q-RED EN4702Q RN4702Q EX4702Q RSM4702QSB

16-1/2" x 5" 16-1/2" x 5" 16-1/2" x 5" 16-1/2" x 5" 16-1/2" x 6" 16-1/2" x 6" 16-1/2" x 6" 16-1/2" x 7" 16-1/2" x 7" 16-1/2" x 7" 16-1/2" x 7" 16-1/2" x 7" 16-1/2" x 7" 16-1/2" x 7" 16-1/2" x 8"

—

OTR4719E2-RED EN4719E2 — EX4719E2 RSM4719ES2SB

OTR4720Q-BLU OTR4720Q-RED EN4720Q RN4720Q EX4720Q RSM4720QSB OTR4524Q-BLU OTR4524Q-RED EN4524Q — EX4524Q —

OTR4524QM-BLU OTR4524QM-RED —

— EX4524QM —

OTR4514Q-BLU OTR4514Q-RED EN4514Q — EX4514Q — OTR4715Q-BLU OTR4715Q-RED EN4715Q — EX4715Q —

—

OTR4725E2-RED —

RN4725E2 EX4725E2 RSM4725ES2SB

4311E

OTR4311E-BLK OTR4311E-GRN OTR4311E-BLU OTR4311E-RED EN4311E — EX4311E —

4515P (T) OTR4515P-BLK OTR4515P-GRN OTR4515P-BLU OTR4515P-RED EN4515P — EX4515P — 4515Q OTR4515Q-BLK OTR4515Q-GRN OTR4515Q-BLU OTR4515Q-RED EN4515Q — EX4515Q RSM4515QSB 4515X3 OTR4515X3-BLK OTR4515X3-GRN OTR4515X3-BLU OTR4515X3-RED EN4515X3 — EX4515X3 — 4707Q OTR4707Q-BLK OTR4707Q-GRN OTR4707Q-BLU OTR4707Q-RED EN4707Q RN4707Q EX4707Q RSM4707QSB 4709E OTR4709E-BLK OTR4709E-GRN OTR4709E-BLU OTR4709E-RED EN4709E — EX4709E — 4709E2 OTR4709E2-BLK OTR4709E2-GRN OTR4709E2-BLU OTR4709E2-RED EN4709E2 RN4709E2 EX4709E2 RSM4709E2SB

4718Q —

— — — —

OTR4718Q-BLU OTR4718Q-RED EN4718Q RN4718Q EX4718Q RSM4718QSB OTR4551Q-BLU OTR4551Q-RED EN4551Q — EX4551Q —

16-1/2" x 8 5/8" 4551Q — 16-1/2" x 8-5/8" 4711Q — 16-1/2" x 8-5/8" 4726E2 —

OTR4711Q-BLU —

EN4711Q RN4711Q EX4711Q RSM4711QSB

OTR4726E2-BLU OTR4726E2-RED EN4726E2 RN4726E2 EX4726E2 RSM4726ES2SB

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End

RELINED BRAKE SHOES

15" DIAMETER Parts below are individual parts. To make a kit, add XK and remove hyphen.

DESCRIPTION

GAWR

SINGLE ANCHOR PIN — PREMIUM OTR1308E-BLU 4" Width

A) Anchor pin opening is 1-5/16" vs 1308Q is less than 1" B) 2-3/4" rivet spacing vs 2" for 1443E

12K

OTR1308E-RED 4" Width

13.2K

OTR1308E — SINGLE ANCHOR PIN, EXTENDED SERVICE — PREMIUM OTR1443E-BLU 4" Width 12K Hardware Kit

1308E-BLU

A) 2" rivet spacing vs 2-3/4" for 1308E

OTR1443E-RED 4" Width

13.2K

OTR1308E

Hardware Kit

—

1443E-BLU

SINGLE WEB — PREMIUM OTR1308Q-BLU 4" Width

A) Anchor pin opening is 15/16" vs 1308E is 1-5/16"

12K

OTR1308Q-RED 4" Width

13.2K

A OTR1308Q-BLU

OTR1308Q

Hardware Kit

—

DOUBLE WEB — PREMIUM OTR4702Q-BLU 4" Width

12K

A) Double web design vs 1308 styles

OTR4702Q-RED 4" Width

13.2K

OTR4703Q-RED 5" Width

13.2K

OTR4710Q-BLU 8-5/8" Width

20K

OTR4702Q-BLU

OTR4710Q-RED 8-5/8" Width

23K

OTR4702Q

Hardware Kit

—

OTR4703Q-RED

FleetPride.com

Brakes & Wheel End 1 RELINED BRAKE SHOES

16.5" DIAMETER Parts below are individual parts. To make a kit, add XK and remove hyphen.

DESCRIPTION

GAWR

A) No hump on web vs 4515Q B) + sign in rivet table vs 4515Q C) Farther rivet hold positions from webs vs 4515Q

4707 BRAKE SHOE B4707Q1

Standard Friction; KIT

20K

20-4707Q-B

Standard Friction; Shoe

20K

D4707Q1

Premium Friction; KIT

20K

P20-4707Q-B Premium Friction; Shoe

20K

H4707Q1

Standard Friction; KIT

23K

4707Q

23-4707Q-B

Standard Friction; Shoe

23K

J4707Q1

Premium Friction; KIT

23K

P23-4707Q-B Premium Friction; Shoe

23K

2769zSHDP

Hardware Kit

—

A) Fixed spring clip B) Holes in table vs “Tab" style C) Straight table edge vs “Tab" style

SINGLE ANCHOR PIN — STANDARD MOUNT OTR4311E-BLK 7" Standard

20K

D) Webs taper at roller end vs straight on 4709E2 E) 4311E does not replace high mount design

OTR4311E-BLU 7" Premium

20K

OTR4311E-GRN 7" Standard

23K

OTR4311E-RED 7" Premium

23K

OTR4311E-ORG 7" Hi-Temp Premium

23K

OTR4311E-SLV 7" Org/Semi-Metal Combo 23K

OTR4311E-GLD 7" Severe Service

26K

OTR4311-BLK

OTR4311EHD Hardware Kit

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End

RELINED BRAKE SHOES

16.5" DIAMETER Parts below are individual parts. To make a kit, add XK and remove hyphen.

DESCRIPTION

GAWR

A) Fixed spring clip B) End of table is tab style vs 4311E is straight edge

SINGLE ANCHOR PIN — ES SERIES, 1ST DESIGN OTR4719E-RED 5" Premium

23K 23K 20K 20K 23K 23K 23K 23K 26K 23K 23K 23K 20K 20K 23K 23K 23K 23K 26K 20K 23K

OTR4725E-RED 6" Premium OTR4709E-BLK 7" Standard OTR4709E-BLU 7" Premium OTR4709E-GRN 7" Standard OTR4709E-RED 7" Premium

OTR4709E-ORG 7" Hi-Temp Premium OTR4709E-SLV 7" Org/Semi-Metal Combo

OTR4709E-GLD 7" Severe Service OTR4726E-RED 8-5/8" Premium

OTR4719E-RED

OTR4709ES

Hardware Kit

A) Fixed spring clip B) No holes in end of table vs 4311E and 4709E

SINGLE ANCHOR PIN — ES2 SERIES, 2ND DESIGN OTR4719E2-RED 5" Premium

OTR4725E2-RED 6" Premium OTR4709E2-BLK 7" Standard OTR4709E2-BLU 7" Premium OTR4709E2-GRN 7" Standard OTR4709E2-RED 7" Premium

OTR4709E2-ORG 7" Hi-Temp Premium OTR4709E2-SLV 7" Org/Semi-Metal Combo

OTR4709E2-GLD 7" Severe Service OTR4726E2-BLU 8-5/8" Premium OTR4726E2-RED 8 5/8" Premium

OTR4709ES2 OTR4719ES2

Hardware Kit

—

OTR4719E2-RED

Hardware Kit for 4719E2 & 4725E2 —

FleetPride.com

Brakes & Wheel End 1 RELINED BRAKE SHOES

16.5" DIAMETER Parts below are individual parts. To make a kit, add XK and remove hyphen. • Many are available in kit form, which includes 2 OTR brake shoes and 1 OTR hardware kit

DESCRIPTION

GAWR

A) Anchor pin hole is 5/8" from outside edge vs P is 3/8"

CLOSED PIN — 1ST DESIGN

OTR4515F-BLK

7" Standard

20K

OTR4515F-BLU 7" Premium

20K

OTR4515F-BLK

OTR4515F-GRN 7" Standard

23K

OTR4515F-RED 7" Premium

23K

A) Slight hump vs 4515Q B) Table taper is different from 4515Q

XEM QUICK CHANGE — 3RD DESIGN OTR4515X3-BLK 7" Standard OTR4515X3-BLU 7" Premium OTR4515X3-GRN 7" Standard

20K 20K 23K 23K

OTR4515X3-RED 7" Premium

OTR4515X3-ORG 7" Hi-Temp Premium 23K OTR4515X3-SLV 7" Org/Semi-Metal Combo 23K OTR4515X3-GLD 7" Severe Service 26K OTR4551X3L-BLU 8-5/8" LH Premium* 20K OTR4551X3R-BLU 8-5/8" RH Premium* 20K OTR4551X3L-RED 8-5/8" LH Premium* 23K OTR4551X3R-RED 8-5/8" RH Premium* 23K OTR4515X Hardware Kit —

OTR4515X3-BLK

* Left and right is required per wheel on 8-5/8"

QUALITY • INNOVATION • DURABILITY

Brakes & Wheel End

RELINED BRAKE SHOES

16.5" DIAMETER Parts below are individual parts. To make a kit, add XK and remove hyphen.

DESCRIPTION

GAWR

A) Closed anchor pin hole vs 4515Q B) Anchor pin hole is 3/8" from outside edge vs Fruhauf is 5/8" NOTE: If this is 2" it is still 4515P, not 4515F

CLOSED PIN — P SERIES OTR4524P-BLU 5" Premium

20K

OTR4524P-RED 5" Premium

23K

OTR4514P-BLU 6" Premium

20K

OTR4514P-RED 6" Premium

23K

OTR4515P-BLK 7" Standard

20K

OTR4515P-BLU 7" Premium

20K

OTR4524P-BLU

OTR4515P-GRN 7" Standard

23K

OTR4515P-RED 7" Premium

23K

A) Straight edge from table vs X3 is humped B) Loose spring clip vs 4311E C) No + in rivet table vs 4707Q

QUICK CHANGE — Q SERIES OTR4524Q-BLU 5" Premium OTR4524Q-RED 5" Premium OTR4514Q-BLU 6" Premium OTR4514Q-RED 6" Premium OTR4515Q-BLK 7" Standard OTR4515Q-BLU 7" Premium OTR4515Q-GRN 7" Standard OTR4515Q-RED 7" Premium

20K 23K 20K 23K 20K 20K 23K 23K

OTR4524Q-BLU

OTR4515Q-ORG 7" Hi-Temp Premium 23K OTR4515Q-SLV 7" Org/Semi-Metal Combo 23K OTR4515Q-GLD 7" Severe Service 26K OTR4551Q-BLU 8-5/8" Premium 20K OTR4551Q-RED 8-5/8" Premium 23K OTR4515QHD Hardware Kit — OTR4515QMB Hardware Kit w/o bushings —

FleetPride.com

1 BRAKE DRUMS

Brakes & Wheel End

• Designed, cast, and machined to all applicable industry standards • Machine-to-balance within TMC RP608 recommendations • 3rd party testing • Manufactured in an ISO certified facility

OTR1601B

BOLT HOLES & SIZE

BOLT CIRCLE DIA. PILOT DIA.

OVERALL DEPTH

SIZE

CROSSES

OTR2501B* 15 x 4 OTR2601B* 16.5 x 7 OTR1501B 15" x 4

10 - 1.35 10 - 1.10 10 – 1.31

11.25 11.25 11.25

8.78 8.78 8.78

9.18

61528B 3721AX 107507 56864B 3922X 107885 61528B 3721AX 107507

85-123382-002 54201-108 85-123788-002 60000-018 85-123382-002 54201-108

10.60

8.86

OTR1502B 15" x 4

10 – 1.31

11.25

8.78

9.04

65548B 3800X 100099920, 10001781 85-123542-002 54293-018

56864 66864B

3922X 3600AX

107885 107885

85-123788-002 85-123207-002 60000-018

OTR1601B 16.5" x 7

10 – 1.00 11.25

8.78

10.54

OTR1602B 16.5" x 7 OTR1603 16.5" x 7 OTR1605 16.5" x 7 OTR1606 16.5" x 7 OTR1607 16.5" x 7 OTR1608B 16.5" x 7 OTR1610 16.5" x 7

10 – 1.00 11.25

8.78 8.53 9.44 9.44

10.62 10.62 8.38 9.50 10.62 10.62 8.75 10.75 11.18 9.04 11.10 11.46 11.10 11.46 9.75 11.22

66884 3576AX 10037819 85-123365-002 54261-018

10 – .81

11.25

66893 3166A 67518 2983CX 62200 2705X

85-122607-002 53026-01 03-122222-002 52230-10 03-012582-002 52020-01 03-123409-002 53033-30 03-122550-002 52705-30 03-122126-002 52327-10 03-120877-002 52877-11

5/6 – .78/.66 11.00

10 – .81 8 – 1.00 10 – .81 10 – .81 10 – .81

11.25 10.83 11.25 11.25 11.25

9 9

66875 3141BX 107875 66895 3141X 107904

9.5

68730 3018AX 60876 3120X 66353F 3757

OTR1611

16.5" x 7

9.44 8.78 8.78 8.78 8.78 8.78 8.78 8.78 9.00

OTR1612 16.5" x 7

10 – 1.00 11.25

10080760

54213-01

OTR1613B 16.5" x 5 10 – 1.31

11.25

65710B 3710X 10020147 85123370002 54238-018 66800B 3782X 10080760 85-123520-002 54269-018 66855B 3807X 10012097 85-123570-002 54229-01

OTR1614B 16.5" x 8

10 – 1.00 11.25

OTR1615B 16.5" x 8.62 10 – 1.00 11.25 OTR1658B 16.5" x 8.0 10 – 1.00 11.25 OTR16585B 16.5" x 8.62 10 – 1.00 11.25

66800B 3782X 10080760

54269-018

66854B 3807X 10012097 85-123570-002 54229-01

OTR1656B 16.5" x 6.0 10 – 1.31 OTR1275B 12.25" x 7.5 8 – 1.00

11.25 10.83

65152B 3687X 10033071

85-123399-002 54248-018

63680F 3887X

54244-01

*Fully machined

HOW TO MEASURE BRAKE DRUMS

A. Overall diameter of drum B. Dust shield recess diameter, if applicable C. Brake surface diameter D. Overall depth E. Brake surface flat F. Depth of dust shield recess G. Squeeler band thickness H. Distance from outside of backface to start of taper I. Inside finished diameter J. Bolt circle diameter K. Pilot Diameter L. Outside finished diameter M. Diameter at taper N. Backplate thickness O. Bolt holes: number and size

When selecting a replacement drum, the manufacturer’s name and part number is helpful. If this information is not available, a replacement drum can be selected by comparing dimensions. This drawing shows the dimensions required to determine the existence of a replacement drum. If all of the dimensions shown are not available, we must have at least dimensions C, D, E, J, K and O to make a selection.

QUALITY • INNOVATION • DURABILITY

1 ADB – PADS

Brakes & Wheel End

BEST-IN-CLASS • Independent test labs confirm OTR ADB pads wear less and have less material loss compared to multiple OE edge-codes • Pads are post-cured and treated with aluminum oxide to eliminate initial break-in • Mechanically-attached for increased shear strength, eliminating potential for pad separation from backing plate • Copper-free and still designed to minimize rotor wear • Meets all FMVSS-121 requirements including RSD mandates

OEM MANUFACTURER OEM CROSS

CALIPER TYPE FMSI

OTR-D1369

OTR-D1203 SB7, SN7 OTR-D1369 ADB22X, SK7

8323-D1203 BENDIX/KB 8479-D1369 BENDIX/KB

5013257

802078, K070796

OTR-D1527

MODULX-DB22 8735-D1527 HALDEX

79022008

68324558, N508206052 3222F2476, 2252H2CD 68932068NZP

OTR-D1310 Lucas D-Elsa2 8425-D1310 MERITOR

EX225_H2 (large radius)

OTR-D1311

8426-D1311

MERITOR

OTR-D1312 D_Lisa

8427-D1312 MERITOR

OTR-D1323 EX225_H3 (small radius) OTR-D1370 EX225_L2 Standard Duty

8435-D1323 MERITOR

2252H3BE/CE

8480-D1370 MERITOR

2252 L2 CD

OTR-D1407 OTR-D1441

D LISA1 ESD225

8515-D1407 MERITOR

N508206046

8577-D1441

MERITOR

976003N

OTR-D1525 DX195 OTR-D1526 DX225 OTR-D1560 D DUCO OTR-D1690 EX225 H2 OTR-D1708 ELSA 225-3

8733-D1525 MERITOR 8734-D1526 MERITOR 8771-D1560 MERITOR 8917-D1690 MERITOR 8931-D1708 MERITOR 8556-D1438 WABCO 8727-D1518 WABCO 9007-D1777 WABCO 9007-D1777 WABCO

195020

KIT225020 20918891 2252H2BA

2102702

OTR-D1438 PAN19 OTR-D1518 PAN17

12999737VT

2611-12999703VT

OTR-D1777

PAN22

1299796 1299796

OTR-D1777-02 MAXXUS22

FleetPride.com

Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62 Page 63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92 Page 93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122 Page 123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152 Page 153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180