20
VANE & GEAR PUMPS
VANE PUMPS, continued
Single Vane Pump 5” Pilot — PN VT6DW0382L03B1 • 5” pilot, SAE 2 bolt flange, 1.25 keyed shaft (no SAE), suction port 2” SAE 4 bolt (UNC), pressure port 1-1/4” SAE 4 bolt (UNC) • Buna seals
• Side porting, suction at 9 o’clock position and pressure 90° from suction • Used on a number of side loader applications, most commonly the Labrie Expert 2000 side loader
CROSS REFERENCE
OEM
Permco
PPT6DW0382L03B1
Labrie
HYP01470-01
Labrie
705070
VT6DW0382L03B1
1537766
McNeilus
GEAR PUMPS SAE B 2/4 Bolt Mounting Flange — PN P5151A224AAXQ2554 • Rear ports (2) 1-1/2” NPT side ports (2) 1-1/2” NPT 2 extended studs, SAE B 7/8” – 13 spline output shaft, 2-1/2” gear set • A very popular gear with both side and rear ports as options
• A 2-1/2” gear set make it ideally suited for many roll-off hoist applications as well as some of the older rear loaders
CROSS REFERENCE
OEM
PL12702BPBB
Muncie
P51A346YRYR2565
Parker
P5151A224AAXQ2554
A3789
Gailbreath
P5151, SAE B 4 Bolt Flange — PN P5151A231AA12ZA2587 • BB 1” 15 spline output shaft, rear ports (2) 1-1/2” NPT, no side ports, extended studs, 2-1/2” gear set • A popular gear pump having 1-1/2” NPT rear ports and a 2-1/2” gear set for larger output flow
• 1” 15 spline makes it ideally suited for many roll-off hoist applications, especially Gailbreath and some other brands as well as some of the older rear loaders
CROSS REFERENCE
OEM
P5151A231AAZA2587
Permco
A4250
Gailbreath
P5151A231AA12ZA2587
942
Powered by FlippingBook