FleetPride National Parts Guide

20

GEAR PUMPS

GEAR PUMPS — SLEEVE BUSHING P257 Series Pumps

GEAR WIDTH (INCHES) 0.50 0.75 1.0 1.25 1.5 1.75 2.00 2.25 2.5 GPM/1000 rpm/Rated PSI 5.5 8.0 11.0 13.9 16.7 19.4 22.2 25.0 27.8 LPM/1000 rpm 20.8 30.3 41.7 49.2 63.2 73.5 84.1 94.7 105.3 IN 3 1.29 1.93 2.57 3.21 3.86 4.50 5.14 5.78 6.43 CC 21 32 42 53 63 74 84 95 105 MAX RPM 2400 2400 2400 2400 2400 2400 2400 2400 2400 Max PSI# 4500 4500 4500 4500 3500 3250 3000 2750 2500 Max Bar# 310 310 310 310 241 224 207 190 172 GEAR WIDTH (INCHES) 0.50 0.75 1.0 1.25 1.5 1.75 2.00 2.25 2.5 GPM/1000 rpm/Rated PSI 7.8 11.7 15.5 19.4 23.3 27.2 31.1 35.0 38.9 LPM/1000 rpm 29.5 44.3 58.7 73.5 88.3 103.0 117.8 132.6 147.4 IN 3 1.8 2.7 3.6 4.5 5.4 6.30 7.2 8.1 9.0 CC 30 44 59 74 89 103 118 133 148 MAX RPM 2400 2400 2400 2400 2400 2400 2400 2400 2400 Max PSI# 3500 3500 3500 3500 3500 3500 3500 3250 3000 Max Bar# 241 241 241 241 241 241 241 224 207

P360 Series Pumps

CLUTCH PUMPS

CP124 Heavy Duty Clutch Pumps • Cubic inch displacements from 0.62 through 2.48 • Speeds to 3000 rpm and pressures to 3500 psi • SAE ”A” mounting with bracket or pad mounting available • Heavy duty sleeve bushing design in a small frame size • Doweled and high strength 3 piece cast iron construction • NPT, O-ring, or split flange porting located on the rear and/or side

• 100% factory tested • Only high torque clutches used with all the popular clutch configurations available • Pressure balanced wear plates maintain high pump efficiency throughout all operating ranges • Typical applications include recovery vehicles, snow plows, spreaders, utility vehicles, winches, small hoists, aerial devices, lift gates, cranes, and light duty equipment

GEAR WIDTH (INCHES) 0.50

0.75

1.0

1.25

1.5

1.75

2.00

Displ CU In/CC .62/10 .93/15 1.24/20 1.55/25 1.86/30 2.17/35 2.48/40

With pad mounting, side and rear porting

GPM / Liters @ 1000 rpm

2.2/8.3 3.6/13.6 4.9/18.5 6.1/23.1 7.4/28.0 8.8/33.3 10.0/37.9

Min RPM

600

600

600

600

600

600

600

Max RPM

3000

3000

3000

3000

3000

3000

3000

With bracket mount, side SAE O-ring ports

Max PSI/Bar

3500/241 3500/241 3500/241 3500/241 3200/220 2900/200 2500/172

921

Powered by