20
POWER TAKE-OFFS
THE QUIET PTO SOLUTION FOR FORD
Muncie Power Products’ quiet FR6Q Series power take-off is designed to fit Ford Super Duty trucks, F-350 to F-550 (may also be used on F-650 – F-750), with the Ford 6R140 transmission. Featuring the latest in noise reduction technology, the FR6Q encompasses a patent-pending noise abatement mechanism that eliminates virtually all gear rattle noise for a quiet power take-off.
• Fits Ford Super Duty trucks w/ Ford 6R140 transmission, primarily F-350 – 550 (may also be used on F-650 – 750) • Noise abatement mechanism eliminates virtually all gear rattle noise
• Available with Muncie Start ®
MAX TORGUE
MAX HP (@ 1,000 RPM)
WEIGHT
Intermittent: 200 lb ft (271 nm)
Intermittent: 39 HP (29 kW)
35 lb (15.9 kg)
FR6Q
Continuous: 140 lb ft (190 nm)
Continuous: 27 HP (20 kW)
Compatible Pump Options for the FR6Q
F Series*
W Series
H Series
K Series
F SERIES
W SERIES
Ultimate power and performance in a small package best describes the F Series gear pump. The pressure-balanced bushing blocks and sleeve bearings provide both extra-long life and high performance. * Both the “N” and “T” mount applications shown for the FR6Q and FR66.
The W Series, an Optimum Series gear pump/motor, features a robust design for long life and maintained performance. All standard “W” displacements are available for the FR6Q and FR66 “Q” mount standard SAE “A” 2-bolt mounting and a 7/8” - 13T splined shaft on F-650 – 750 applications. Note: Use W Series pumps on F-650, F-750 chassis only.
H SERIES
K SERIES
The H Series pump rear cover allows for optimum compatibility with the FR6Q and FR66 “Q” mount applications. Enhanced design features include elimination of side ports and removal of nearly 1/2” of material from the suction side of the housing, providing increased clearance of the floorboard. All standard H Series displacements will be available for the FR6Q and FR66 “Q” mount applications and come standard with a SAE “A” 2-bolt mounting flange and 7/8” - 13T splined shaft. Note: Use H Series pumps on 4 x 2 chassis applications only.
The K Series standard gear housing will be replaced with the S Series gear housing for use on the FR6Q and the FR66 “Q” mount applications. Elimination of side ports on the S Series gear housing significantly reduces the overall width of the pump, providing increased clearance of the floorboard. 6, 13 and 17 GPM K Series models are available for the FR6Q and FR66 “Q” mount applications due to the limited number of S Series displacements. Each unit comes standard with a SAE “A” 2-bolt mounting flange and 7/8” - 13T splined shaft. Note: Use K Series pumps on 4 x 2 chassis applications only.
912
Powered by FlippingBook