4
SHAFT SLEEVES
SHAFT SLEEVES
• Hard chrome finish delivers superior durability compared to other brands • Wear resistant for longest life
• Friction resistant to conserve power • Low profile to accommodate even multi-lip oil seals
MAX. SHAFT DIAMETER WIDTH LENGTH
INSTALL TOOL DEPTH
PN MIN. SHAFT DIAMETER
99138 1.368
1.374
0.500
0.625
1.000
99176 1.759
1.767
0.562
0.688
1.032
99187 1.869
1.878
0.562
0.688
1.250
99225 2.247
2.255
0.780
0.937
1.375
99237 2.372
2.380
0.780
0.937
1.375
99250 2.497
2.506
0.780
0.937
1.500
99262 2.623
2.631
0.780
0.937
1.500
99274 2.743
2.751
0.780
0.937
1.375
99275 2.748
2.756
0.780
0.937
1.375
99287 2.871
2.879
0.780
0.937
1.375
99293 2.935
2.943
0.780
0.938
1.500
99300 2.998
3.006
0.812
1.000
1.500
99325 3.248
3.256
0.812
1.000
1.500
99350 3.498
3.506
0.812
1.000
1.500
99362 3.621
3.629
0.812
1.000
1.750
99372 3.748
3.756
0.688
0.875
1.875
99395 3.995
4.006
0.600
0.725
2.125
99399 3.995
4.006
0.812
1.000
2.125
99599 3.992
6.004
1.000
1.250
2.030
TECH TIPS How To Install Dura Sleeves
• Clean all surfaces where the seal contacts the shaft. File down all burrs or rough spots. Measure the diameter of worn and unworn part of the shaft in 3 locations. The average diameter should be within the range printed on the box label to ensure sufficient press-fit. (Cement not required.) • Mark the exact location on the shaft where the sleeve must be placed to cover the worn area. If the wear is deep, fill the worn area with metal type filler and install the sleeve before the filler sets. Place the installation tool over the sleeve. • Hammer gently on the installation tool (or squared off tube of same diameter for longer reach) until the sleeve reaches the right location on the shaft.
231
Powered by FlippingBook