20
GEAR PUMPS
GEAR PUMPS
Gemini Heavy Duty Pumps for Live & Moving Floors & Dump Trailers Gemini dual use pumps are designed to be used with dual use applications, typically a dump trailer and a live floor or goose neck. Features
• Dual Pressure Relief: low for dump bodies, high for live floors • Easy to switch from low to high pressure using truck air • Large 1-1/2” NPT suction port in the gear housing • Three-line system for continuous duty • Field adjustable relief settings • Doweled construction • 37 gpm @ 1800 rpm, 100% factory tested
• Heavy duty ”controlled stress” roller bearings • Factory installed ”OEM” air shift with full metering capabilities • Direct mount SAE ”B” 4 bolt or twin shafted remote mount with bracket • Relief valve protects the high pressure portion of the system as well as the pump
GPM/900 RPM 2000 PSI
GPM/1200 RPM 2000 PSI
GPM/1500 RPM 2000 PSI
MAX RPM MAX PSI
SERIES
IN 3 (CC)
VPDPC20ZLA2532 5.12 (84.3) 17.5
24.5
30.5
1800 3200
The third sleeve is installed in the pump, therefore, the return port must be plumbed back to tank, below the oil line at all times.
VPHPVC-HP-13 Dual Pressure Controller
This special dual pressure controller is to be used in the Gemini pump system. Features PTO On/Off, Dump Raise/Lower. As an option, it has a switch to go into high pressure mode for live floor application, with a light and a buzzer on the console, warning you that you are in high pressure mode.
864
Powered by FlippingBook