INTEGRATED PLATE MOUNT
19
FOR ANGLE MOUNT
FOOT MOUNT
WITH ANGLE MOUNT
FIFTH WHEEL ASSEMBLY
NOTE: For replacement mounting brackets, see Parts Catalog XL-FW10081PM
FIFTH WHEEL ASSEMBLY PART NUMBER GUIDE “New” Standard Duty Fifth Wheel Assembly Part Numbers FW 35 X X XX X X XX*
FIFTH WHEEL ASSEMBLY PART NUMBER GUIDE — SAF HOLLAND ®
Travel
Option Code**
Release Handle
00 = Stationary 12 = 12” 18 = 18” 24 = 24” 36 = 36” 48 = 48” 06 = 6” No-Tilt 18 = 18“ No-Tilt 30 = 30” No-Tilt 42 = 42” No-Tilt
General HOLLAND prefix indicating complete Fifth Wheel Assembly
Fifth Wheel*** Series 35 = FW35 Series 33 = FW33 Series Low Lube 31 = FW31 Series NoLube 17 = FW17 Series 16 = FW16 Series LowLube AL = FWAL Series Low Lube
00 = No Option 02 = Manual Secondary Lock 24 = Drilled & Tapped for Auto Lube
L = Left-Hand (Road-Side) R = Right-Hand (Curb-Side)
28 = Dolly Release Handle 86 = Air Release Top Plate 1L = Standard ELI-te 1M = ELI-te with Air Release
Mounting Style
Angles
Standard Duty Sliders A = Outboard (1 pc. Tie-Bar) B = Inboard (Serrated 3 pc. Tie-Bar) C = Inboard (Straight 3 pc. Tie-Bar) (DTNA air fitting) F = Outboard (1 pc. Tie-Bar) (DTNA Air Fitting) G = Outboard (3 pc. Tie-Bar ) H = Inboard (1 pc. Tie-Bar for PACCAR) J = Outboard (1 pc. Tie-Bar for PACCAR) L = Inboard (+40K Suspension-PACCAR) M = Outboard (+40K Suspension-PACCAR)
No Angle Mounting Systems W = Aftermarket Inboard No-Tilt & FW33 Komp ( Serrated Edge) X = Outboard Slider or Inboard Slider w/o angles or Stationary w/o Angles Y = Outboard No-Tilt Z = OEM Inboard No-Tilt (Straight Edge)
1N = ELI-te with Manual Secondary 1P = ELI-te with Option 24 Auto Lube 1R = ELI-te with Option 14 Lube Fittings 1S = ELI-te with No-Tilt 1V = Pre-Drilled for ELI-te 1W = Pre-Drilled for ELI-te with Air Release 1X = ELI-te with Greased Lock Pins 1Y = ELI-te with Air Control Module
Mounting Angle Frame Width A = 33.25" B = 33.38" C = 33.50" D = 33.62" E = 33.75" F = 33.88" G = 34.00" H = 34.12" J = 34.25" K = 34.38" L = 34.50" The following frame widths are available only on “V” Stationaries
HOW TO MEASURE FIFTH WHEEL MOUNTING HEIGHT
Standard Duty Stationaries Z= Integrated Plate Mount Y = Foot Mount X = Bracket Castings Only (No Angle or Base Plate)
NOTE: For FW0070 assembly part number, please contact Customer Service for assistance 800.876.3929
V = Brackets with 5” Vertical Leg Angle W = Brackets with 4" Vertical Leg Angle
Height (approx.) 6 = 6" (Stationary Only)
Specialty Mounting Systems N = No-Tilt
STATIONARY
Height Measured from Face to Frame Rail
M = 34.62” N = 34.75” P = 34.88” Q = 35.00” R = 35.12” S = 35.25” T = 35.38” U = 35.50” V = 35.62“ W = 35.75”
7 = 7" 8 = 8" 9 = 9" 0 = 10”
NOTE: No-Tilt conversion kits available. Please contact Customer Service for assistance 800.876.3929
1 = 11” (Komp Only) 2 = 12” (Komp Only) 3 = 13” (Komp Only)
SLIDER
*Please note that no "dashes" are used for the complete fifth wheel assembly new part number. **Please note that not all options are available on every top plate; Multiple option combinations are available. ***Please note that ELI-te is for FW35, FW33 and FW31 only.
SAF-HOLLAND, Inc. 888.396.6501 Fax 800.356.3929
File Name: "New - Standard Duty Fifth Wheel Part Number Map_MASTER_16Jan17.ai/pdf"
safholland.com
SAF-HOLLAND Canada Limited 519.537.3494 Fax 800.565.7753 Western Canada 604.574.7491 Fax 604.574.0244
824
Powered by FlippingBook