10
A/C COMPRESSORS
COMPRESSORS
DESCRIPTION / APPLICATION
OIL TYPE GROOVES VOLT MOUNT PORT TYPE
PN
Ester PAG 100 w/o
Tube O-Ring
PTAC5256
Comp York ET210L
12
Direct
PTAC5256
Comp York ER210L Aftermarket
Tube O-Ring
PTAC5236
PAG100 w/o
12
Direct
PTAC5269
Ester PAG 100 8
Tube O-Ring
PTAC5269
CCI Comp 2W Clutch
12
Direct
Sanden Style 2GR SJ Head
PTAC5320
PTAC5320
PAG 100 2
12
Ear
Pad
PTAC5327
Sanden Style
PAG 100 2
12
Ear
HTO
PTAC5327
Comp SD7H15 4776/4482 MDAHD
PTAC5331
PAG 100 8
12
Direct
Pad
Comp SD7H15 PV8 119 mm Direct Mount 12V GH Head PAG 100 8
PTAC5333
12
Direct
Pad
PTAC5333
Compressor York ER210R
POE / PAG 100 w/o
OTR100210
w/o
—
—
ATTENTION: The replacement of a compressor requires installation of a new receiver drier/accumulator and the system to be flushed per the manufacturer’s guidelines. See Page 381 for additional warranty information.
TECH TIPS DID YOU KNOW? Putting a larger displacement compressor on a vehicle rarely makes it perform better and in some cases it can actually decrease performance. Most systems are designed for specific goals. These goals are determined by a number of factors: glass area, interior space, projected heat load, engine operating RPM, just to name a few. After all these factors have been calculated, the heat exchangers are designed for a specific BTU range. The compressor is then selected for the application.
382
Powered by FlippingBook